Choosing a Beagel Camera

This is a guide to help people in selecting their first Beagel Camera.

Beagel Camera Models

Cameras have different configurations, and there is no “best” distinction between different configurations, just different. For example, whether the USB port outputs power, the memory size of the Beagle Camera pre-installed Micro SD card, all configurations support “Monitor and Control Your 3D Printer Remotely”, “PLUG AND PLAY”, “AUTO GENERATE TIME LAPSE VIDEOS”.

Prices are different and may be related to different shipping places, different purchasing platforms, etc.

32GB(Default)

The 32GB(Default) is initially launched using a 32GB Micro SD card, as the storage size, the USB port does not have 5V Power Output.

64GB

The 64GB is using a 64GB Micro SD card as the storage size, and the USB port has no 5V power output.

32GB-for Prusa 3D Printer

The 32GB-for Prusa 3D Printer is using a 32GB Micro SD card as the storage size, the USB port has no 5V power output (this configuration will support serial connection with Prusa machine).

64GB-for Prusa 3D Printer

The 64GB-for Prusa 3D Printer is using a 64GB Micro SD card as the storage size, the USB port has no 5V power output (this configuration will support serial connection with Prusa machine).

This configuration has been discontinued.

Note: There may be some stickers in your BeagleCamera package, but it’s not standard. The Camera comes with a USBTyperA-TyperC cable (Camera power supply cable) and a USBTyperA-Micro cable (serial communication cable) by default. —